CM5200 Issue

Home / the12volt's Install Bay / Car Security and Convenience / CM5200 Issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

golfita

Member - Posts: 2

Joined: December 25, 2015

Location: Saskatchewan, Canada

Posted: December 25, 2015 at 5:31 PM / IP Logged

Hey guys,

I have an '02 Corolla with an CM5200 in it.

This morning the remote start didn't start the care, just crancked it and because of the cold and not plugging the car in over night it didn't start. I started it with the key and after I came back home when I locked the car with the remote I saw that the lights didn't blinked but the doors locked. tried to start it from remote but nothing happened. So it locks/unlocks but lights don't come on anymore and it does not start the car, not even crancking. Checked the 2 fuses under the dash on the wiring and they are good. Any ideas?

Thank you!

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 25, 2015 at 7:17 PM / IP Logged

Yes, you are in Valet Mode. The locks working but the Parking Lights not confirming is the give-away. If you have the 4 button remotes, press Lock and Start at the same time while the ignition is ON.

Soldering is fun!

Back to Top

golfita

Member - Posts: 2

Joined: December 25, 2015

Location: Saskatchewan, Canada

Posted: December 25, 2015 at 9:42 PM / IP Logged

Thanks man! Worked! Only thing is that I had to press lock+trunk to get out of valet mode. Thanks again!!!

Back to Top

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 26, 2015 at 4:28 AM / IP Logged

Could be. The manual actually says buttons 1 and 3 so I guess it depends on the style of remote.

At least you're all set for the cold weather. CM5200 Issue -- posted image.

Soldering is fun!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.