EVO-GMT4 2011 Silverado 1500

Home / the12volt's Install Bay / Car Security and Convenience / EVO-GMT4 2011 Silverado 1500

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

typicalmale1978

Member - Posts: 1

Joined: January 07, 2016

Location: Illinois, United States

Posted: January 07, 2016 at 4:49 AM / IP Logged

Installing unit in stand alone mode. All of the programming and updates as well as decryption went as per the manual. Issue is that when pressing lock button 3 times I only get two blue lights on the unit and no other activity. When I start the vehicle with the key the yellow LED is active. I have enabled options C1 and D1 but no go. Thanks for any help.

Back to Top

Search for other posts by typicalmale1978

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: February 22, 2016 at 11:10 AM / IP Logged

Have you looked here?

https://fortin.ca/en/vehicles/chevrolet/silverado_1500/2011/troubleshooting.html

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.