95 Gmc Jimmy Keyless Remote Programing

Home / the12volt's Install Bay / Car Security and Convenience / 95 Gmc Jimmy Keyless Remote Programing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

69camaro

Member - Posts: 2

Joined: May 17, 2003

Posted: July 23, 2003 at 7:32 PM / IP Logged

Hey, I got in touch with a GM mechanic who gave me the directions in the manual.

Here they are:

1. Remove the cover by the pedals that hides all of the wires

2. On the left hand side, there should be a red connector that has two wires running into it. Short these two together and the locks should cycle. Keep them shorted together.

3. Press any key on the remote and the locks should cycle again.

4. Disconnect the short on the red connector, thats it.

This should work for Blazers too.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: July 24, 2003 at 3:11 PM / IP Logged

go to keylessride.com

drop them a line and they should be able to help you

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 Gmc Jimmy Keyless Remote Programing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.