Remote Starter in 95 Ford Taurus

I am installing a PF 50 (CODE ALARM )unit in a 95 Taurus and need the programing info . I can not get the starter to work and at attempt get two flashes from lights but no kick to starter , also why no LED on at lock and is there a starter bypas. Please HELP meEd Mak

hey ed   i really dont have alot of info by what you gave  but ill try to give you something...... as far as the bypass there is no anti-theft on that year unless it was put on at a later date........

12 VOLTS CONTANT	(5) YEL	IGNITION HARNESS
IGNITION 1	RED / LT GRN	IGNITION HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	GRY/YEL	IGNITION HARNESS
ACCESSORY /HEATER BLOWER 2	BLK/GRN	IGNITION SWITCH HARNESS
STARTER	WHT/PNK	IGNITION HARNESS
PARKING LIGHTS	BRN(+)	@HEAD LGT SWITCH
DOMELIGHT	BLK/LT BLU(+)	DRV KICK PANEL
PWR DOOR LOCK	PNK/YEL	DRV KICK PANEL
PWR DOOR UNLOCK	PNK/LT GRN	IF FACT KEYLESS TYPE B             W/O FACT KEYLESS TYPE C
TRUNK RELEASE	PURP/YEL (+)	AT KEYLESS MOD (SEDAN)
TACH SENSOR	TAN/YEL	IGNITION HARNESS
BRAKE	RED / LT GRN(+)	SWITCH ON BRACKET ABOVE BRAKE PEDAL
HORN	YEL/LT GRN(-)	IN STEERING COL
FACTORY DISARM	N/A

also check with the wires from the alarm you might have just wired something  backwards... thats really all i can do with the info you gave... if it dont work be more specific what wires did you hook up where....also did you hook up the tach wire if its a hard starting car you will have to do this