Alarm Interface to PowerLock

Home / the12volt's Install Bay / Car Security and Convenience / Alarm Interface to PowerLock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

atomsite

Member - Posts: 36

Joined: November 13, 2003

Location: United States

Posted: November 15, 2003 at 3:45 PM / IP Logged

Vehicle: 2004 Chevy Avalanche

I'm interested in the PowerLock wireless vehicle immobilizer. It appears fairly tamper resistant. Apparently it can be interfaced to the OEM system using a GMDL4.

I would also like to add a 2 way remote/alarm so I can be notified if anyone is tampering with the vehicle. Does anyone know of a 2 way remote than can be programmed to match the PowerLock code. Or vice versa, can the PowerLock code be programmed to match the 2 way remote code. That way the 2 way remote could arm/disarm both systems. Otherwise I would have to carry two fobs around in my pocket. Not so good...

atomsite

Member - Posts: 36

Joined: November 13, 2003

Location: United States

Posted: November 15, 2003 at 4:36 PM / IP Logged

Question: Is DEI 456G equivalent to GMDL4? Which one is more reliable?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm Interface to PowerLock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.