(-) to (+) pulse with dei 451m

Home / the12volt's Install Bay / Car Security and Convenience / (-) to (+) pulse with dei 451m (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ctvr4

Member - Posts: 5

Joined: January 02, 2004

Location: United States

Posted: January 05, 2004 at 5:50 PM / IP Logged

I'm trying to use the dei 451m relay pack to reverse polarity for +triggered door locks in 03 mustang with keyless enrtry. Dei's instructions for the connection of this dual relay pack are really vague, I need some help figuring out what color wire goes where. A wiring shematic or instructiin from someone who has used the 451m before. Thanks

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 05, 2004 at 6:53 PM / IP Logged

Purple wire goes to constant +12V, blue is unlock, green is lock, white and brown are unused. Then the three wire harness plugs into a dei alarm.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 05, 2004 at 8:01 PM / IP Logged

If you are using a DEI alarm, the doorlock outputs can be positive without using a 451m. But you didn't list what alarm you have....

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: January 05, 2004 at 8:40 PM / IP Logged

as long as you have poative outputs you wont need the 451m because they are low level triggers for the locks. less money you spend on the install the more the profit!

ctvr4

Member - Posts: 5

Joined: January 02, 2004

Location: United States

Posted: January 05, 2004 at 11:45 PM / IP Logged

Thanks that helps alot. It wasn't an alarm, it was a rattler remote start with keyless entry. According to the manual out puts were either (-) 0r (+) depending which way the wires were connected. I tried it didn't work tech guy said it was misprint in manual. Anyway the system came with the 451m thanks for the info everyone.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

(-) to (+) pulse with dei 451m

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.