Automate alarm in valet mode

Home / the12volt's Install Bay / Car Security and Convenience / Automate alarm in valet mode (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Mary drain

Member - Posts: 1

Joined: January 24, 2004

Location: United States

Posted: January 24, 2004 at 4:51 PM / IP Logged

I have a 1993 Grand Prix with an automate alarm system. It is currently in the valet mode and I don't know how to get it out. I never received the manual when I bought the car used. Can anyone help me?

maryd

Back to Top

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: January 24, 2004 at 4:59 PM / IP Logged

find a toggle switch below the steering wheel it will have a red tip on it, take your key and put it in the ignition switch, turn the ignition to the run position and then back off and then move the switch to the other position and the red led should turn off.

zargon ruler of estranorth

Back to Top

kiteman

Copper - Posts: 98

Joined: January 14, 2004

Location: United States

Posted: January 24, 2004 at 5:04 PM / IP Logged

Zargon info was almost right, but it's not going to be a toggle, you will be looking for a little black push button switch, when you locate that, the turn the key all the way on, then back off, then hold that push button switch in for 3 sec.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Automate alarm in valet mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.