SC2 Keyless Entry

Home / the12volt's Install Bay / Car Security and Convenience / SC2 Keyless Entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jtmag1

Member - Posts: 4

Joined: October 01, 2003

Location: United States

Posted: April 06, 2004 at 2:04 PM / IP Logged

I just installed a freedom 500 KEyless entry system into my 95 Saturn SC2. Everything works but the Keyless Entry. I even tried patching the wiring just behind the actuators to make sure that I had the correct wires, and there was still no respone. According to the directions that I have, I did everything right. Am I supposed to do something with the Orange wire thats between the white and the Blue?¿?¿?

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: April 07, 2004 at 1:46 PM / IP Logged

you installed a keyless entry system and everything works fine except the keyless entry... I'm confused... what is it that works fine???

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

Javelin3o4

Copper - Posts: 239

Joined: August 22, 2003

Location: United States

Posted: April 07, 2004 at 3:57 PM / IP Logged

if you went directly to the actuators you would have to use a relay like a 451M.

POWER LOCK lt. blue |+ |either kick harness to rear |

POWER UNLOCK white |+ |either kick harness to rear |

Back to Top

Jtmag1

Member - Posts: 4

Joined: October 01, 2003

Location: United States

Posted: April 07, 2004 at 11:59 PM / IP Logged

The Alarm part works fine, it chirps and the lights flash.

Back to Top

Jtmag1

Member - Posts: 4

Joined: October 01, 2003

Location: United States

Posted: April 08, 2004 at 12:14 AM / IP Logged

Just to Clarify, what is meant by driver kick harness or Passenger Side Rear Body Harness. Where can I get the relay that I need?

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: April 08, 2004 at 12:58 AM / IP Logged

the drivers kick panel is just that... the panel the driver kicks... big trunk of wires behind the carpet on the left.

a 2000 saturn S-series should have (+) trigger locks with lock being lt. blue and unlock being white. grab said wire you may suspect to be right, and test for voltage at zero, then going to 12 when you press the desired lock/unlock function.

MECP certified installer

Back to Top

Jtmag1

Member - Posts: 4

Joined: October 01, 2003

Location: United States

Posted: April 11, 2004 at 12:18 AM / IP Logged

Thanks for the help, I picked up that relay and it made everything go smoothly

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

SC2 Keyless Entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.