DEI 6500esp factory disarm

Home / the12volt's Install Bay / Car Security and Convenience / DEI 6500esp factory disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

boosted-fc3s

Member - Posts: 8

Joined: August 11, 2003

Posted: May 23, 2004 at 8:50 PM / IP Logged

I have a customer with a 1988 mazda rx7 w/ the factory alarm. He insists on keeping the factory alarm functional. Is there an output on the 6500 that will pulse the factory disarm? The brain says theres two, but one only pulses w/ remote start commands, and the other according to dei is status/factory rearm? Thanks.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: May 23, 2004 at 9:30 PM / IP Logged

use the disarm wire to disarm when remote start. thats all you need, when you remotely unlock it should disarm, too.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

boosted-fc3s

Member - Posts: 8

Joined: August 11, 2003

Posted: May 24, 2004 at 2:25 PM / IP Logged

Worked like a charm. Thanks.

Back to Top

Steve Michaluk

Member - Posts: 1

Joined: June 12, 2004

Location: United States

Posted: June 12, 2004 at 2:43 PM / IP Logged

I am trying to locate the factory alarm brain in my 1991 RX-7 convertible.

I am installing keyless entry, and have already installed actuator in

driver's door and run lead wires into car. I would like to connect to

contant 12v, ground, alarm set, and alarm unset. Can you please advice

which wire is constant 12v.

Thanks,

Steve

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 6500esp factory disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.