507T tilt sensor falsing

Home / the12volt's Install Bay / Car Security and Convenience / 507T tilt sensor falsing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dhs-9

Member - Posts: 6

Joined: June 03, 2004

Posted: June 22, 2004 at 9:22 AM / IP Logged

I have a 507T motion/tilt sensor which is wired to the clifford matrix ground when armed wire. the motion sensor is set for 3 degrees tilt , normal motion, 2 min delay. After being armed for 6-10 min it falses. Also I have the trigger on hte trunk but whenit falses the hood icon flashes also. I dont even have anything hooked up to the hood. Anyone know why it falses and the hood icon appears.

Thanks

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 22, 2004 at 11:47 AM / IP Logged

on most units the hood can also be the trunk wire.....are you using the - trigger wire??? not the one for the door....

if so sis you diode isolate each item???

if not try that....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

promodeepcycle

Copper - Posts: 152

Joined: October 17, 2003

Location: United States

Posted: June 22, 2004 at 2:10 PM / IP Logged

are you using the instant trigger or multi-plex?

dont be a pet monkey ..use your dmm

Search for other posts by promodeepcycle

dhs-9

Member - Posts: 6

Joined: June 03, 2004

Posted: June 22, 2004 at 2:23 PM / IP Logged

I am using the instant trigger I had the trunk trigger unused so I used that trigger for the tilt sensor.

Thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

507T tilt sensor falsing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.