Warrior 3 Pin-out

Home / the12volt's Install Bay / Car Security and Convenience / Warrior 3 Pin-out (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

slipnfall

Member - Posts: 36

Joined: July 11, 2003

Location: United States

Posted: July 28, 2004 at 7:45 PM / IP Logged

Hi folks,

I purchassed a used car a few months back and it came with a Warrior 3 security system(model A334-1). Can anyone here provide a pin-out of the 11-pin connector for the computer? It did not come with a remote, so I am working on removing the old wiring. It would help to know what/where the wires on this connector are snaked to.

THanks greatly!!!

-Jamie

slipnfall

Member - Posts: 36

Joined: July 11, 2003

Location: United States

Posted: July 28, 2004 at 7:49 PM / IP Logged

oh BTW it's manufactured by Maxiguard

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Warrior 3 Pin-out

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.