1996 Nissan Maxima, window module

I'm new to this forum and I need some assistance with installing the roll-up window module.  I think is a good way to learn about a car if you have more hand on experience.  I went thru the forum in regards to installing this module and alot of people mention is not that hard to install. So I decided to do it.

I went to ebay and purchased a Power Window Control Module. Here's the link of the product.  http:///.com/dll?ViewItem&category=14934&item=5720546470&rd=1

I have a 1996 Nissan Maxima GLE and I need to know where to put the module.  I don't think is that effective to install module on the door.   I have printed the Haynes and the12volts wire layout of the car.  I think is the best to put the module next the Master control system.

I have no clue where all the wires are located?  I'm guess, is located behind the HU of the stereo system.  I have opened up the HU to install the CD Changer, but there's so much wires. I don't know which one goes to the driver or passenger door.  If anyone here would assist me or tell me where the wires are located. I would really appreicate it.  Thank  you

On the module, there's a couple of wires i'm not sure where it goes to

Pink= To Acessory Item?

Orange= 500ma. Activation?

orange need to hook your alarm .when alarm i arm will send out (-) and will roll up your window

pink you can hook up to any need (-) when alarm is arm

window roll up box the best i thing you can put in door next to master swith