2004 toyota tacoma magnadyne +4700

installing a magnadyne +4700 in a tacoma alarm wont seem to program or come out of valet. we pulled the valet plug and the alarm works normal???? but no out put to the starter kill. seems like alot of problems for 1 alarm. ive never installed this brand something new im trying from a distributor. does anyone use these???? also parking lights wont flash unless the doors open is this thig crazy or what?

also does anyone have a wiring diagram for this truck?

This is what I have:

Constant 12 volts	WHITE/ RED AND WHITE	IGNITION SWITCH HARNESS
Ignition 12 volts	BLACK/ RED	IGNITION SWITCH HARNESS
Starter	BLACK	IGNITION SWITCH HARNESS
Dome Light	BLACK/ WHITE (-)	13 PIN CONN ON BACK OF FUSE BOX * **
Trunk Pin Switch	NONE
Parking Lamp	GREEN (+)	REAR BODY HARNESS, LOWER DRIVER KICK
Power Lock	BLACK/ BLUE	12 PIN CONNECTOR IN
Power Unlock	RED / YELLOW	DRIVER KICK PANEL ***

* Also Found As BLACK/ WHITE (-) In 3 Pin Conn. High In Dr Kick Panel. ** Fuse Box Located Behind Driver Dash. *** Child Safety Locks:GREEN/ BLACK In 12 Same Connector As Door Lock Unlock Wires.

Child Safety Door Lock s .

 Some Door Lock Systems Require Toyota / Lexus Data Link Door Lock Circuit   Lock Detection Wire GREEN/ BLACK. Lock Wire GRAY. Unlock Wire BLUE/BLACK.The Connections Can Be Made At The 12 Pin Connector In The Drivers Kick Panel. 

Accessories
Window Up	D\ BLU/YEL D\ RED / BLUE P\ RED / BLK P\ YELLOW @ MAIN
Window Down	F/ BLUE R/ BLU/BLK F/ RED / GRN R/ LT GRN SWITCH
Ign Key Warn	L GREEN/ RED (-)	2 PIN CONN IN STEERING COLUMN HARNESS
Trunk Release	N/A
OEM Horn	GREEN/ RED (-)	6 PIN CONN IN STEERING COLUMN HARNESS
Headlights	RED / WHITE (-)	AT HEADLIGHT SWITCH *
OEM Alarm Arm	BLUE/BLACK(-)	12 PIN CONN IN DRIVER KICK PANEL
OEM Alarm Disarm	GREY (-)	12 PIN CONN IN DRIVER KICK PANEL

 Reversal Rest At Ground Power Window Circuit Diagram. * With Daytime Running Lights, Headlights Are WHITE/ GREEN (-) At 9 Pin Conn. Rear Of Fusebox (Bottom, Center)

Remote Start
Tach Signal	GREEN/ BLACK	AT IGNITER OR DASH TACHOMETER *
Ignition #2	BLACK / YELLOW	IGNITION SWITCH HARNESS **
Ignition #3	NONE
Accessory	BLUE/RED	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE -	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL ***
Reverse Light	RED / BLACK (+)	AT SWITCH ON TRANSMISSION ***
Rear Window Defrost	NONE

* With OEM Tach. With Out OEM Tach- Use Igniter Wire Not BLACK / YELLOW ** Key Warning Wire (LT GRN/RED At Steering Column) MUST See Ground In Order To Remote Start. Suggest Use Negative Ignition Output From Unit *** Alternate Location- GREY 26 Pin Connector in Driver Kick Panel

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

anyone have anyideal about the problems with the alarm

anybody got any ideals?????