Rattler 369D on 96 Accord

Home / the12volt's Install Bay / Car Security and Convenience / Rattler 369D on 96 Accord (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cindyAnn

Member - Posts: 2

Joined: October 22, 2004

Location: United States

Posted: October 22, 2004 at 6:53 PM / IP Logged

I'm getting ready to install a DEI 369D remote start/keyless entry on my 1996 Accord LX. I've installed several stero systems in the past but this will be my first try at a remote start. I've read the manual that came with the system and pulled my cars diagram from the site but still have a few questions.

1. Do I need to use the 451M that shipped with the unit? Or just cut the 3 pin connector off and wire the Green to lock and blue to unlock?

2. Where can I find the neutral safety wire?

Thanks in advance for all the help!

Back to Top

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: October 22, 2004 at 8:07 PM / IP Logged

yes, use the 451m because it will give you more power for the door locks, and as far as neutral safety wire if it is an automatic, you do not need to worry about it.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Back to Top

cindyAnn

Member - Posts: 2

Joined: October 22, 2004

Location: United States

Posted: October 22, 2004 at 9:05 PM / IP Logged

Thanks for the reply. If I don't hook up the neutral safety swith where do i put the toggle switch? The manual says to put it inline with the neutral safety wire.

Thanks

Back to Top

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: October 23, 2004 at 6:07 PM / IP Logged

the way the alarm works is when it sees a ground on the neutral safety swith it will let the car start, and when it has no ground it will not let it start. so if you never plan to temporairily desable your RS just ground that wire and the remote start will always work, but if you want to have the option of disabling it temporarily, then inline the toggle swith in the wire and again ground it, that way you can break the ground by toggling the swith off and on.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rattler 369D on 96 Accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.