the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar help 04 Accord


Post ReplyPost New Topic
< Prev Topic Next Topic >
Civickid01 
Member - Posts: 4
Member spacespace
Joined: October 05, 2004
Location: Canada
Posted: October 30, 2004 at 1:50 AM / IP Logged  
Installed 2 way Compustar alarm/starter into 04 Accord customer wants the function to roll the windows down with the remote. The vehicle itself is equipped with window roll down with key turned, released and then turned and held in unlock postion or if the remote unlock is pushed released then held. The windows will roll up if the door key is turned, released and then turned and held. I want to use the aux wires to get this function done.
the way i am thinking of doing it, this is all theory, tie the two aux wires into the unlock wire then program first aux to pulse then second aux to 7 seconds. Am i close? please help
help?
Civickid01 
Member - Posts: 4
Member spacespace
Joined: October 05, 2004
Location: Canada
Posted: November 01, 2004 at 12:14 AM / IP Logged  
Come on peeps
help?
hagmanti 
Silver - Posts: 304
Silver spacespace
Joined: September 14, 2004
Location: United States
Posted: November 01, 2004 at 1:42 AM / IP Logged  
FWIW, I would not do this. As DEI says in their training, cars that have that functionality often have little in the way of safety on the window motors (since they assume you'll be near the car when the windows are going up/down, as you'd likely be if you had the key in the door or were unlocking the car).
Now, I don't know how true that'll be on a late-model Accord (care to stick your arm in the window and test it for me?).
Anyway, assuming that the wires that control this behavior are the unlock wires (which seems reasonable given the same behavior from both remote and key in lock, but isn't a given!), I wouldn't bother using both auxes for it-- you can always get a pulse by hitting unlock.
Unless she wants to be able to roll down the windows w/o unlocking the car.... In which case I'd still only use one aux channel, but program it to validity and have it act exactly the same way her current remote does.
Me, sorry to be of so little use, but still better than nothing, I hope...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer