Please Help Disable OEM Factory Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Please Help Disable OEM Factory Alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dsmevoeclipse

Member - Posts: 1

Joined: October 29, 2004

Location: United States

Posted: October 30, 2004 at 2:43 PM / IP Logged

Hi,

i'm a new member and i have recently installed a Viper 791 XV car alarm on my 97' mitsubishi eclipse. The viper alarm totally kicks @ss!!! Everything is perfect, but i am running into these 2 problems:

1- OEM factory alarm on the 97 eclipse needs to be disabled. I can't seem to locate the disable OEM alarm wire.

2- With the Viper 791 XV Power door locks unlock but do not LOCK.

3- *not really a problem, but when the remote (791 XV) starts the car... is the car suppose to blink it's parking lights during the remote start run?

Please if anyone can be of help, it is much appreciated.

Thanks,

dsmevoeclipse

Back to Top

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: October 30, 2004 at 3:15 PM / IP Logged

green with white in the drivers door harness should disarm the alarm. as far as locks go are you sure you ahve the correct wire?

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 30, 2004 at 3:31 PM / IP Logged

Not sure on Viper 791, but the RS units we sell the Parking lites Blink first for Start then remain on for the running duration

OEM Alarm Disarm

GREEN / WHITE

(-) DRIVER KICK PANEL

Power Lock	BROWN / SILVER DOTS	AT RELAYS BEHIND PASSENGER
Power Unlock	BROWN / WHITE/ SILV DOTS	SIDE OF CONSOLE **

** Door Lock Control Unit Located In Passenger Kick Panel. Relays Located In Console Accessed By Removing 2 Screws. Then Removing Entire Passenger Side Console Panel.

With OEM Keyless There Are 2 Unlock Wires Both Are BRN/WHT And Should Be In Driver Kick Panel Must Diode Isolate These Two Wires.

Negative Pulse Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: October 30, 2004 at 6:03 PM / IP Logged

and the 791 has a feature built in it to either keep lights steady or blink. comes from factory set to blink.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Please Help Disable OEM Factory Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.