the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

command start with viper 690xv

Home / the12volt's Install Bay / Car Security and Convenience / command start with viper 690xv (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
67impala 
Member - Posts: 5
Member spacespace
Joined: November 07, 2004
Location: Canada
Posted: November 07, 2004 at 1:37 PM / IP Logged  

ok i got a older car with a command start from like 4 or 5 years ago...

its carburated and its got a solenoid installed on the carb or something and it pumps the gas

and then it waits 2 seconds to crank the engine and it works great!

my problem is i dont have a alarm...

this one shop said they could hook the new alarm i want viper 690xv :) and then they could wire the old command remote wire for the antena or something and wire it into the alarm so i could just hit a button on my new alarm remote and it would send a signal to the old command start to start the car like it always does... pump gas twice and wait 2 seconds then crank over the engine... etc

it makes sense to me but i wanna know what u guys think before i spend all this money...

thx guys :)

Sexified 
Copper - Posts: 87
Copper spacespace
Joined: October 17, 2004
Location: Canada
Posted: November 07, 2004 at 1:47 PM / IP Logged  
if the remote start works then i would say go for it, but keep in mind with the alarm triggering the remote start system you will only get the range of the alarm, wich in some cases is only 50 feet. i would ask what the range of the alarm is before you purchase it. if it's not great then change the entire system to a starter/alarm, and keep the throttle solonoid to pump the carb.
sweet.
67impala 
Member - Posts: 5
Member spacespace
Joined: November 07, 2004
Location: Canada
Posted: November 07, 2004 at 2:22 PM / IP Logged  

SEXIFIED wrote:
if the remote start works then i would say go for it, but keep in mind with the alarm triggering the remote start system you will only get the range of the alarm, wich in some cases is only 50 feet. i would ask what the range of the alarm is before you purchase it. if it's not great then change the entire system to a starter/alarm, and keep the throttle solonoid to pump the carb.

its a viper 690 2 way its got some good range :P plus i park in the driveway so range for starting it isnt a problem

67impala 
Member - Posts: 5
Member spacespace
Joined: November 07, 2004
Location: Canada
Posted: November 08, 2004 at 9:45 PM / IP Logged  
but its possible to hook it all up right?
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: November 08, 2004 at 11:16 PM / IP Logged  
yes of course, the command start has a yellow input that triggers the starter when grounded. Use the WHITE/ Blue wire from the 690xv, then take the ground while running wire from the command start (white or purple, I can't remember) and run it to the blue wire on the 690xv (multiplex input) this will shunt the ign and shock sensor inputs during remote start.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
67impala 
Member - Posts: 5
Member spacespace
Joined: November 07, 2004
Location: Canada
Posted: November 09, 2004 at 6:30 PM / IP Logged  

extreme1 wrote:
yes of course, the command start has a yellow input that triggers the starter when grounded. Use the WHITE/ Blue wire from the 690xv, then take the ground while running wire from the command start (white or purple, I can't remember) and run it to the blue wire on the 690xv (multiplex input) this will shunt the ign and shock sensor inputs during remote start.

sweet good to hear :P

im getting it installed tomorrow at visions in the westend :P

i leave the wiring to the guy there i just wanted to make sure it could be done everything makes sense just wanna to hear what u guys thought :P

thx for the help :)

67impala 
Member - Posts: 5
Member spacespace
Joined: November 07, 2004
Location: Canada
Posted: November 10, 2004 at 9:09 PM / IP Logged  

alright i got everything installed it all works great!

only thing wen car is started i cant shut off the old command start from the remote..  which is nothing and i expected this i just gotta let the car run for 15 mins or go out and hit the brake pedal :P

now my front running lights wont go on or flash when i arm or disarm the rear lights work and when i start the car now my headlights or running lights dont go on...

when i'm driving the yellow running lights are supposed tobe on they arent though but my signals and everything work...

the old command start used to turn running lights on and headlights and running lights would flash when u poped the trunk or unlocked the doors...

anyone have any ideas?

what it could be im gunna change the bulbs tomorrow

he said he checked out all the fuses and couldnt figure it out for the life of him..

any help would be great thx guys


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer