2000 Prelude factory alarm connector

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Prelude factory alarm connector (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 23, 2004 at 10:37 PM / IP Logged

Hi, im installing a viper 791 in my prelude and im having trouble finding some of the wires. I have the diagram from this site and it says the door trigger is BLACK/ white at the factory alarm connector. I can't find this connector. I found a WHITE/ black wire at the bottom of the fuse box that is connected to the door trigger but im not sure if this is it. could someone give me a more detailed location of this harness. thanks

ninjazx6e

Member - Posts: 11

Joined: November 15, 2004

Location: United States

Posted: November 23, 2004 at 10:50 PM / IP Logged

that is the correct wire

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 23, 2004 at 11:08 PM / IP Logged

The only reason why i don't think thats it is because there should also be a RED / white and a GREEN/ orange and there isn't. are you sure thats the location of the factory alarm connector??

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 23, 2004 at 11:35 PM / IP Logged

anybody else???

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 24, 2004 at 6:35 AM / IP Logged

The alarm connector is GREEN with about 20 + wires in it. It will be hgh on the driver's side dash.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 24, 2004 at 10:43 AM / IP Logged

do i need to pull the fuse panel off. ive looked so hard and still cannot find it.

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 24, 2004 at 11:15 AM / IP Logged

also if i don't have a factory alarm where can i find the door trigger, and door lock/unlock

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 24, 2004 at 11:39 AM / IP Logged

The alarm plug will most likely be taped up against another loom of wires high under the driver's dash area. There will most likely be blue tape holding it up there. Even if the Prelude didn't come with OEM security, the plug will still be there for you to access the power door lock wires.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: November 24, 2004 at 12:16 PM / IP Logged

i used this wire, easy to find.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

patgill

Member - Posts: 6

Joined: September 23, 2004

Location: United States

Posted: November 24, 2004 at 5:07 PM / IP Logged

i took the bolts off the fuse box so i could pull it out and look around a little bit better but i still didn't find it. im gonna look again tommorow and if i don't find it im just gonna use the WHITE/ black wire for the door trigger and find the wires on the passenger side kick panel for the lock/unlock. thanks for your help

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.