Cobra Bridge Car Alarm
Home /
the12volt's Install Bay /
Car Security and Convenience / Cobra Bridge Car Alarm (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: December 10, 2004 at 7:15 PM / IP Logged
Hi
I wonder if you guys could help me out with a problem that I have with my Cobra bridge 7913 alarm system thats fitted to my 1990 ford sierra 4x4 2.9.
I,ve fitted the alarm system myself & everything is fine apart from getting the central locking to work correctly with the alarm.
I,ve located the lock/unlock wires for the cl in the multiplug located in the drivers footwell & wired the orange & violet lock/unlock wires from the alarm to these connections but the problem is when I arm the alarm it lock all doors but when I dissarm the alarm all the doors remain locked.
How can i get it working right do i need a relay etc
Regards
Anthony
Posted: December 10, 2004 at 11:06 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
