remote works but car switch does not

Home / the12volt's Install Bay / Car Security and Convenience / remote works but car switch does not (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mrwhitehat

Member - Posts: 14

Joined: December 27, 2004

Posted: January 01, 2005 at 10:21 PM / IP Logged

Hi. Got the remote lock/unlock working great on a new unit,

BUT now the drivers side door switch quite working. (The factory passanger side lock switch works normally.)

The following link shows exactly how I have it hooked up.

http://www.wichitavocations.com/locks.html

Thanks for any help you can give guys! Thanks!

mrwhitehat

Member - Posts: 14

Joined: December 27, 2004

Posted: January 01, 2005 at 10:23 PM / IP Logged

PS - this is on a 99 Dodge Ran p/u

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 01, 2005 at 10:23 PM / IP Logged

lets start off with the car info.............................your post doesnt include the most important info........

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

mobileworks

Copper - Posts: 136

Joined: December 16, 2004

Location: United States

Posted: January 01, 2005 at 10:55 PM / IP Logged

So if you use the keyless entry it works fine but if you push the button on the drivers door, nothing happens?

mrwhitehat

Member - Posts: 14

Joined: December 27, 2004

Posted: January 01, 2005 at 11:02 PM / IP Logged

Right! Exactly...

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 01, 2005 at 11:25 PM / IP Logged

Power Lock ORANGE / VIOLET 16 PIN CONNECTOR IN DR. #203

Power Unlock PINK/VIOLET KICK PANEL

#203 - See Reversal Rest At Ground Door Lock Diagram.

how did you wire up the door locks??????????????????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

mrwhitehat

Member - Posts: 14

Joined: December 27, 2004

Posted: January 01, 2005 at 11:48 PM / IP Logged

Please see the link above for how I wired things....

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 02, 2005 at 12:06 AM / IP Logged

try to wire them up like this:

unlock relay:

86 output from alarm (unlock)

87a switch side

30 motor side

87 12 volts

85 12 volts

lock relay:

86 12 volts

87a switch side

30 motor side

87 12 volts

85 output from alarm (lock)

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 02, 2005 at 12:07 AM / IP Logged

try to wire them up like this:

unlock relay:

86 output from alarm (unlock)

87a switch side

30 motor side

87 12 volts

85 12 volts

lock relay:

86 12 volts

87a switch side

30 motor side

87 12 volts

85 output from alarm (lock)

make sure you fuse all 12 volt wires......

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

mrwhitehat

Member - Posts: 14

Joined: December 27, 2004

Posted: January 02, 2005 at 3:34 PM / IP Logged

Same result: Remote works, but inside car switch does not work.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.