Wiring power door locks

Home / the12volt's Install Bay / Car Security and Convenience / Wiring power door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

my_Wang

Member - Posts: 4

Joined: October 28, 2004

Location: Canada

Posted: January 03, 2005 at 9:24 PM / IP Logged

Hey guys,

I just recently had installed a Viper 125 VX car starter with the options to add my existing door locks, and my trunk popper. I didn't have the installer do it because they wanted an extra $80 to add these in. I wish i had the wiring diagram for the module but I don't. What is the difficulty level of doing this and what should i look for on the module itself to distinguish the outputs from each other. Any advice would be of great help. Thanks in advance. Steve.

boucher911

Member - Posts: 27

Joined: January 02, 2005

Location: Canada

Posted: January 03, 2005 at 11:10 PM / IP Logged

for your door locks u need to find out what they are (-) , (+) , or multiplex , when dealing with the negative it is straight forward just like it says lock to lock and unlock to unlock, when it comes to (+) i use an inverter and on the nordic starts and prostarts this simple connects to you lock and unlock then gets plugged into the module , and for multiplex you ned to find you wires and throught the programing of the module you have to program the pulse so one pilse to un lock and 2 pulses to lock there is more to it than that but thats a quick overview

DaBouch

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 04, 2005 at 1:58 AM / IP Logged

In ALL of your posts........make sure to allways include year make and model.......K

my_Wang

Member - Posts: 4

Joined: October 28, 2004

Location: Canada

Posted: January 04, 2005 at 9:43 PM / IP Logged

Sorry about that. Its a 1995 Monte Carlo. Is it a possibility that someone is familiar with this alarm and my car? Generally are most vipers the same in that respect. Thanks.

my_Wang

Member - Posts: 4

Joined: October 28, 2004

Location: Canada

Posted: January 04, 2005 at 9:43 PM / IP Logged

Sorry about that. Its a 1995 Monte Carlo. Is it a possibility that someone is familiar with this starter and my car? Generally are most vipers the same in that respect. Thanks.

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: January 05, 2005 at 1:13 AM / IP Logged

Here's a link for your vehicle's wiring:

1995 M.C.

I couldn't find a diagram for the 125VX, but I did find the Viper 130XV. Looks like the doorlock outputs are (-), if your alarm's doorlock outputs are (-), you have to convert the outputs to (+).

Here's a link that shows you how:

converting polarity

ASE Certified

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring power door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.