1999 Mazda 626 Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Mazda 626 Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dwahle

Member - Posts: 3

Joined: January 05, 2005

Location: United States

Posted: January 05, 2005 at 10:56 AM / IP Logged

Hi all,

I need help in the installation of an alarm with all the bells and whistles. (Rmote start, windows roll down, alarm, etc) for a Mazda 626 4 cylinder (LX) If you have any lessons learned, instructions or any advice it would be appreciated.

Dwahle

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 05, 2005 at 11:34 AM / IP Logged

Mazda

626

1998-1999

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	GREEN	IGNITION SWITCH HARNESS
Ignition #1:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #2:	BLACK/ RED	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	BLUE	IGNITION SWITCH HARNESS
Brake Light:	WHITE/ GREEN	AT SWITCH ABOVE BRAKE PEDAL **
Tach Signal:	YELLOW	AT COIL MODULE
Parking Lights:	WHITE/ RED (+)	GREEN PLUG AT FUSE BOX
Headlights:	N/A
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	** Brake Wire Also Found In Driver's Kick Panel.

Mazda

626

1998-1999

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	BLACK	IGNITION SWITCH HARNESS
OEM Alarm Disarm:
Dome Lights/Superv:	RED / WHITE (-)	AT FUSEBOX
OEM Horn:
Power Lock:	BROWN / YELLOW (-)	FOUND AT A TAN MODULE NEAR THE HOOD RELEASE
Power Unlock:	WHITE & BROWN / WHITE (-)	FOUND AT A TAN MODULE NEAR THE HOOD RELEASE***
Trunk Release:	ORANGE	ABOVE FUSE BOX
Alarm Input Wire:	RED / WHITE (-)	AT FUSEBOX
Notes:	***The white wire will unlock the drivers door only, and the BROWN / white will unlock the other doors. Use both wires and diode isolate each. See also Note #201 Negative trigger door locks.

dwahle

Member - Posts: 3

Joined: January 05, 2005

Location: United States

Posted: January 05, 2005 at 12:42 PM / IP Logged

THanks for the information.

I don't suppose that you have any installation instructions?

Thanks again.

Dwahle

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 05, 2005 at 12:45 PM / IP Logged

what are you looking for?

dwahle

Member - Posts: 3

Joined: January 05, 2005

Location: United States

Posted: January 05, 2005 at 12:50 PM / IP Logged

Any help or instruction on where to start, and the best way to do it.

THanks!

Dwahle

DiscoKing

Member - Posts: 9

Joined: September 27, 2003

Location: United States

Posted: January 05, 2005 at 5:32 PM / IP Logged

I'm actually in the middle of an install on a 1998. Connections went pretty smooth. I started with power connections, then safety cutouts, and then the locks and lights. The only mix up I made was with the + and - parking light wires. Keyless entry is working great but I can't get the Remote Start to do anything. Do you know if the 626 needs an interface module to bypass a transponder? The salesman told the guy I'm doing this for that he didn't need one but I thought it did. That would make sense why the system is not doing anything.

DiscoKing

Member - Posts: 9

Joined: September 27, 2003

Location: United States

Posted: January 05, 2005 at 9:32 PM / IP Logged

Thanks for the info. That didn't work either so I guess I'll have to keep checking wires. The other funny thing I found was that the hood switch has >1 ohm difference between open and closed. Does that make sense cause it doesn't sound like enough to me. Usually switches should have an open reading in one of the positions.

DiscoKing

Member - Posts: 9

Joined: September 27, 2003

Location: United States

Posted: January 08, 2005 at 7:19 PM / IP Logged

Nada. I get absolutely nothing. With key in the ignition and the hood switch disconnected nothing happens. Not even a sound that it is attempting anything. I have double checked the wiring and can find nothing wrong. A bit frustrating. Ugh.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Mazda 626 Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.