use tach wire or injector wire

Home / the12volt's Install Bay / Car Security and Convenience / use tach wire or injector wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gforceman

Member - Posts: 14

Joined: December 26, 2004

Location: United States

Posted: January 05, 2005 at 4:44 PM / IP Logged

motor cranks wont start on first time 2nd time a little backfire in mainifold - it was determined the crank time was to short - i am using the tach wire - should i use the injector instead ??? i have seen cars using this method , and what injector and which wire -- thx bunchies

Back to Top

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: January 05, 2005 at 8:02 PM / IP Logged

either or, I usually go to injectors try both wires, I have never had a problem doing that... one will work and one won't... Good luck....

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Back to Top

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: January 05, 2005 at 10:06 PM / IP Logged

look at all the injectors....usually there 2 wires going to each injector, 1 of those wires are all the same color on each injector.....use the other wire

Testing is the key

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

use tach wire or injector wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.