Python 650 ESP replacement remote

Home / the12volt's Install Bay / Car Security and Convenience / Python 650 ESP replacement remote (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rpm510

Member - Posts: 7

Joined: September 17, 2003

Location: United States

Posted: February 18, 2005 at 1:00 PM / IP Logged

Does anyone know how to program a replacement remote for Python 650 ESP? Or do I need a bitwriter to do it? Thanks.

Back to Top

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: February 19, 2005 at 8:57 PM / IP Logged

1 open the door 2 turn ign to run 3 press and release valet switch number of times for desired channel then press it once more hold while holding valet switch down press button on remote you want to do that channel.

1 arm/ disarm/ panic

2 silent/ remote valet/ trunk release

3 other acc

4 arm only

5 disarm only

6 panic only

7 auto learn for seperate lock / unlock buttons

8 auto learn for single button lock / unlock

9 delete all remotes

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Python 650 ESP replacement remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.