the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

toyota 4runner stock keyless


Post ReplyPost New Topic
< Prev Topic Next Topic >
mr dibb 
Member - Posts: 15
Member spacespace
Joined: March 01, 2005
Location: United States
Posted: March 16, 2005 at 9:35 PM / IP Logged  
I just finished putting in a viper remote start in my truck, i love it, it works perfectly. The only problem is that my stock keyless entry will not work when the car is on. The keyless entry relay is in the back tailgate. I spent hours trying to find a wire that would make it work when the car is on. Is there any way I can get the stock keyless to work when the engine is on, either through programming, or wiring,(maybe hook some wire up to the ignition output of the viper?) Please help me, this is getting very annoying. THANKS!!!!
mr dibb 
Member - Posts: 15
Member spacespace
Joined: March 01, 2005
Location: United States
Posted: March 16, 2005 at 11:00 PM / IP Logged  

ok, well i was out there fooling around, and figured out that if I take out the ecu ig fuse, the keyless works no matter what position the key is in. I have not tried starting the truck yet, will this even work? I would be taking the output from the viper and hooking it up to this, therefore it would not be getting voltage during remote start. I tried earlier removing the ig fuse, and the truck would start, but then shut off. What will removing the ecu ig fuse do? what systems run off of this? Thanks


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer