97 accord door lock and other problems

Home / the12volt's Install Bay / Car Security and Convenience / 97 accord door lock and other problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Taito

Member - Posts: 8

Joined: February 16, 2005

Location: United States

Posted: March 23, 2005 at 1:00 AM / IP Logged

Just installed a Compustar 2W900-AS on a 97 honda accord with a factory alarm and problems that we have ran into after the installation is that the 'SRS' light stays lite, and the driver side door does not lock when I arm the car. When I arm the car all the other three door locks except the driver side. BUT when the car is arm I can open the unlock driverside door without setting the alarm off with the shock sensor off.

Anybody come across this problem?? All my connections are soldered taped, and loomed, so all my connections are good.

Also does anybody know what wires to connect if I want my alarm to open my driverside door only when I first disarm, and to unlock the other doors I have to hit the unlock button again, hopefully I am making sence thanks.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 23, 2005 at 6:47 AM / IP Logged

The SRS you have probably tripped it by accident. Use one of either of these to reset the light :

http://www.velocitymotorsport.com/images/install_notes/ Acura_Honda_SRS_reset.jpg
http://www.velocitymotorsport.com/images/ install_notes/099.jpg

The door lock thing, make sure that you have the driver's door closed when you arm the car. Otherwise the door will not lock. You also wired the driver's priority door unlock system. If you want all doors to unlock you should have only used the BLUE wire for the unlock .

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Taito

Member - Posts: 8

Joined: February 16, 2005

Location: United States

Posted: March 23, 2005 at 3:12 PM / IP Logged

With the lock the all the doors are closed and when I arm the car all the other doors lock except the driverside door which stays unlock.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 23, 2005 at 9:15 PM / IP Logged

"BUT when the car is arm I can open the unlock driverside door without setting the alarm off with the shock sensor off."

Check your door pin switch and make sure it is working properly.

Be careful whose advice you buy, but be patient with those who supply it. 97 accord door lock and other problems -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 accord door lock and other problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.