'91 Mercury Grand Marquis, Front door locks

Home / the12volt's Install Bay / Car Security and Convenience / '91 Mercury Grand Marquis, Front door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mattr

Member - Posts: 6

Joined: March 22, 2005

Location: United States

Posted: March 25, 2005 at 1:39 PM / IP Logged

Hi all,

I recently purchased a '91 Mercury Grand Marquis. The previous owner apparently installed an aftermarket alarm, a Code Alarm. My problem is this. My remote's arm button AND power lock switch (on the car itself) won't lock or unlock the front doors. What should I be looking for to fix this problem? Any suggestions are much appreciated.

mattr

Member - Posts: 6

Joined: March 22, 2005

Location: United States

Posted: March 25, 2005 at 1:45 PM / IP Logged

I should have mentioned that the back doors lock and unlock fine both with the controls on the door and the alarm remote.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'91 Mercury Grand Marquis, Front door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.