Door trigger on 2000 Mustang Gt

Home / the12volt's Install Bay / Car Security and Convenience / Door trigger on 2000 Mustang Gt (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

treman

Member - Posts: 2

Joined: April 28, 2005

Location: United States

Posted: May 22, 2005 at 10:46 PM / IP Logged

How and which way do the diodes go in my 2000 mustang Gt and to which wire on the module. I hooked it up and it would go off when the doors were opened when it was armed. My problem was every half hour the alarm would go off. The diagnostic light said it was the door triggers. I put the diodes both ways and on the pos and neg triger wire. Help me out please

chungo

Copper - Posts: 135

Joined: December 31, 2003

Location: United States

Posted: May 23, 2005 at 10:54 AM / IP Logged

http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1076.pdf

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door trigger on 2000 Mustang Gt

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.