1997 Buick Lesabre

Home / the12volt's Install Bay / Car Security and Convenience / 1997 Buick Lesabre (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gdanderson22580

Member - Posts: 1

Joined: May 28, 2005

Location: United States

Posted: May 30, 2005 at 1:18 PM / IP Logged

I was wondering does any one have any tricks on running a siren and tack wire thru the firewall on a 1997 Buick Lesabre!

Thanks in Advance

Search for other posts by gdanderson22580

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: May 30, 2005 at 2:31 PM / IP Logged

If you cannot find a factory grommet, you will need to drill a small hole to run the wires.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: May 30, 2005 at 3:51 PM / IP Logged

This car is just a little bit painful. If I recall you can feed the wire in on the passenger side rubber gromet.

Be careful whose advice you buy, but be patient with those who supply it. 1997 Buick Lesabre -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1997 Buick Lesabre

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.