wiring lights to alarm

Home / the12volt's Install Bay / Car Security and Convenience / wiring lights to alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pbaronmk1cab

Member - Posts: 5

Joined: September 09, 2005

Location: United Kingdom

Posted: September 12, 2005 at 12:55 PM / IP Logged

Can anyone help me with where to wire the output from the alarm to my lights ?? I want the indicators to flash on arm etc.

Also can some clever bod confirm the colour of the wire that i put the starter kill relay into. I know one side goes to the ignition side and one to the starter side of the wire but just want the wire confirming i think its the RED / black one.

Car is a mk1 golf cab 1985

cheers

genehewett

Copper - Posts: 151

Joined: December 12, 2003

Location: Georgia, United States

Posted: September 14, 2005 at 6:55 PM / IP Logged

The starter wire is RED / blk. As for the park lights there is 2 of them one for the left and one for the right. You have to use booth of them by diode isolating them. Do Not Connect Them Togather! If you need help with this reply to this post and i will post diagram.

Starter

RED / black

ignition harness

Parking Lights+

gry/blk and gry/red

light switch

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: September 16, 2005 at 11:14 AM / IP Logged

it takes about 30 seconds to test and find this wire.

test before all connections

Why oh Why didn't i take the blue pill

Darren Power

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring lights to alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.