starter kill relay

Home / the12volt's Install Bay / Car Security and Convenience / starter kill relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

r2nv

Member - Posts: 12

Joined: November 30, 2004

Location: Canada

Posted: October 16, 2005 at 7:23 PM / IP Logged

Im installing a remote starter and alarm combo, when i cut the starter wire in half i put switch side of relay on 87a, and starter side on 30, ignition on 86 and neg input on 85. where do i put the starter wire form the remote starter unit. on with side of the relay. please help

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 16, 2005 at 7:34 PM / IP Logged

SPDT Relay

1 or 2 amp Diode across PIN 86 & PIN 85 with stripe facing PIN 86

Cut Starter wire in half:

PIN 86 & 30 = Ignition switch half of cut wire

PIN 87a = Starter side of cut wire

PIN 85 = Negative Output from Alarm while Armed

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

starter kill relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.