the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 791XV, problem/ Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
blob_54 
Member - Posts: 8
Member spacespace
Joined: October 30, 2005
Location: United States
Posted: November 07, 2005 at 3:05 AM / IP Logged  
I recently installed the alarm and keyless entry on my car only.
I wanted to test it so I had my bro hi the windows to set off the alarm and have it page me... it worked
then I had him open the door and have it page me for that... it worked.
But here's the problem... now whenever I disarm the car it allerts me that the sensor and door alarms are going off or something. Also the led blinks when its not armed... it blinks 2 times then a pause then it blinks 3 times... it keeps repeating that and its getting very annoying to drive with it flashing at me, expetially at night. Also, it doesnt page me anymore since its doing that stuff.
So, here's my Q, how do I make it so when the alarm is unarmed it wont keep telling me that it did go off in the past, and also get the paging to work again? I'm pretty sure that both these issues are tied together.
Anyone with similer things happen or helpfull info will be greatfully appreciated.
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know
kaezoo 
Copper - Posts: 125
Copper spacespace
Joined: April 26, 2005
Location: United States
Posted: November 07, 2005 at 10:01 AM / IP Logged  
It should reset when you turn the key on and off. If it doesn't, you may not have the ignition wire hooked up correctly; you need to have the pink wire from the relay pack connected to an ignition wire.  If you have only one ignition wire to power, you can't use the pink/white; you have to use the pink wire.
blob_54 
Member - Posts: 8
Member spacespace
Joined: October 30, 2005
Location: United States
Posted: November 07, 2005 at 3:40 PM / IP Logged  
ya, I didnt get the pink wire hooked up yet...
I only connected the H1 wires, but i'm gunna take some time and try to wire up the rest today
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know
kingdavid 
Member - Posts: 7
Member spacespace
Joined: July 15, 2003
Location: Jamaica
Posted: November 07, 2005 at 3:51 PM / IP Logged  
blob_54 wrote:
I recently installed the alarm and keyless entry on my car only.
I wanted to test it so I had my bro hi the windows to set off the alarm and have it page me... it worked
then I had him open the door and have it page me for that... it worked.
But here's the problem... now whenever I disarm the car it allerts me that the sensor and door alarms are going off or something. Also the led blinks when its not armed... it blinks 2 times then a pause then it blinks 3 times... it keeps repeating that and its getting very annoying to drive with it flashing at me, expetially at night. Also, it doesnt page me anymore since its doing that stuff.
So, here's my Q, how do I make it so when the alarm is unarmed it wont keep telling me that it did go off in the past, and also get the paging to work again? I'm pretty sure that both these issues are tied together.
Anyone with similer things happen or helpfull info will be greatfully appreciated.
i think u accidentally turn off the page mode..u need to go back in the remote programming press all four depends on which one u have or the button on the back of the two way. then u toggle the asterisk for page mode on .. the way that u have it set now is u will only recieve a page when u press a button on the remote to disarm, this function save on the battery life,
redpeppers 
Silver - Posts: 483
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: November 07, 2005 at 4:00 PM / IP Logged  

blob_54 wrote:
ya, I didnt get the pink wire hooked up yet...
I only connected the H1 wires, but i'm gunna take some time and try to wire up the rest today

when u hook the remote start part up....when u put the key in.....the problem will go away.

Where theres is a wire there's a way.
pss5075104 
Copper - Posts: 144
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: November 08, 2005 at 9:28 AM / IP Logged  
accualy when u put the key in it will not rest it is when you turn the key to on, it will send 12v to the brain and reset the brain.
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
blob_54 
Member - Posts: 8
Member spacespace
Joined: October 30, 2005
Location: United States
Posted: November 08, 2005 at 10:03 AM / IP Logged  
ya, thnx guy's
I hooked up remote start yesterday, and all my problems went away, and teh remote start works great :), and I even figured out how to bypass the clutch, I just unhooked the w1 wires and used another wire to bridge teh connection then put some tape on it to hold it :)
if anyone has any Q's on doing this install on 90-93 accords, leme know, I'm sure it'll be the same as mine
1991 2dr Accord
Lowered, full intake/egzaust
Nice sound system
I'm also into xbox modding, if you have any Q's about getting yours modded or even fixed, leme know

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer