Remote starter/keyless entry/alarm

Home / the12volt's Install Bay / Car Security and Convenience / Remote starter/keyless entry/alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Trent109

Member - Posts: 42

Joined: January 03, 2003

Location: United States

Posted: November 11, 2005 at 4:01 PM / IP Logged

Ok, i have an O1' eclipse, im tryin to put in a Air Wolf Two way remote car starter. Well i got the first plug all wired up, that has the Ignition wires (2) Ground, starter wire 12v battery power all that good stuff for power, well i pluged that into the module, and it turns on all the light on as if its about to start. is this because i dont have the rest of the loom hooked up, or is my module defective? I have checked my wiring and it looks good accordin to the alamrs instructions and the color chart to the model of my car, is there something else ishould do?

Thanks

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 11, 2005 at 5:10 PM / IP Logged

This vehicle has a transponder ign. system that need to be bypassed.....is that done?

Is this a manual transmission? I don't believe this unit is designed for a manual trans! (clutch bypass, door monitoring, hand brake....etc.)

Back to Top

Trent109

Member - Posts: 42

Joined: January 03, 2003

Location: United States

Posted: November 11, 2005 at 6:16 PM / IP Logged

My car is automatic, and i have the bypass module, but i think they sold me the wrong one for this application, they gave me a PASS4 module, if you need a pic let me know. but the lights come on with out me pressing any buttons on the remotes, that doesnt really sound normal to me. but in a few, i will have a picture of the wiring diagram. and if you know the diagram. I have the CON1 6Pin wiring done.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 11, 2005 at 9:17 PM / IP Logged

If you only have th 6 wires in CON1 hooke dup at the unit is giving power to the IGN wires, then you have a problem. There should only be power to the IGN wires prior to remote start. You may have a faulty CPU.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote starter/keyless entry/alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.