the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power door locks on 97 dodge ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jrfast 
Member - Posts: 5
Member spacespace
Joined: July 11, 2005
Posted: November 30, 2005 at 1:59 PM / IP Logged  

I recently installed an alarm and keyless entry.  I believe that this truck uses the 5 wire reversal set up.  well it worked great for about a month or two. now drivers side pdl switch will not work at all and pass will only lock.  tha alarm will lock the doors when it is armed but will not unlock them when disarmed.  any help would be great.thanks

Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: November 30, 2005 at 4:37 PM / IP Logged  
Does the switch work without using the alarm keypad? Try redoing the relays for the doorlocks.
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: November 30, 2005 at 8:03 PM / IP Logged  

Sounds like something got messed up with you unlock relay.  Double check make sure the wires are connected tightly to the relay.  If they are try testing the relay, you never know the relay could be bad.  Hope this helps

Cause I'm So white and nerdy...
First Class Certi-fried installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer