the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Excursion remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
ed langdon 
Member - Posts: 8
Member spacespace
Joined: December 20, 2005
Location: United States
Posted: December 23, 2005 at 5:40 PM / IP Logged  
i installed a ford gold system in a  01 ford excursion with pats bypass . It will crank but wont fire with the remote start .What did i do wrong ?
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: December 23, 2005 at 6:51 PM / IP Logged  
Will it Start with the Key in the Ignition??  ( Not turned ON, just inserted )
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
ed langdon 
Member - Posts: 8
Member spacespace
Joined: December 20, 2005
Location: United States
Posted: December 24, 2005 at 6:24 PM / IP Logged  
no it will not , it starts fine with the key .remote will not start , tried  holding key next to pats still no go . ED
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: December 24, 2005 at 8:16 PM / IP Logged  

Have you verified ALL your Ignition wires with the Key ( Map your Ignition Circuit )?

Constant 12 voltsL GRN/PPL(2) & YEL(2)IGNITION SWITCH HARNESS
Ignition 12 voltsRED / BLACKIGNITION SWITCH HARNESS
StarterRED / BLUEIGNITION SWITCH HARNESS

Ignition #2GRAY / YELLOWIGNITION SWITCH HARNESS
Ignition #3RED / BLACKIGNITION SWITCH HARNESS **
AccessoryBLACK/ GREENIGNITION SWITCH HARNESS
** There Are Two RED / BLACK Ignition Wires Present At Switch. One RED / BLACK Wire Is A Lighter Shade Of RED And Is The Main Ignition Circuit. The Second RED / BLACK Wire Is A Darker Shade Of RED And Is The Second Ignition
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
ed langdon 
Member - Posts: 8
Member spacespace
Joined: December 20, 2005
Location: United States
Posted: December 26, 2005 at 5:11 PM / IP Logged  
on the pats wire   instuructions it said        red - crank                  white - crank output (+)    .Where do i find these ?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer