97 Chevy Blazer, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 97 Chevy Blazer, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

iagirl

Member - Posts: 1

Joined: December 31, 2005

Location: United States

Posted: December 31, 2005 at 1:03 PM / IP Logged

We are having problems with our 97 Chevy Blazer. We do have a "Bulldog" remote start that was on the vehicle when we purchased it. We are needing to uninstall the remote start since it has went bad, and has now litterally burned up our starter. Any ideas or can I find a diagram for this remote start. We have no books for it at all.

Any help is greatly appreciated! We are 9 months pregant and this is our only vehicle 97 Chevy Blazer, remote start -- posted image.

catalin capota

Copper - Posts: 74

Joined: December 28, 2005

Location: British Columbia, Canada

Posted: December 31, 2005 at 1:13 PM / IP Logged

Find it, remove the wiring from the starter and re-connect everything that looks factory. Make sure it's all taped or heat shrunk, whatever you're using.... and you should be fine.

Search for other posts by catalin capota

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Chevy Blazer, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.