Installing a Remote Starter

I am trying to install a audiovox remote starter/alarm in my 1997 nissan altima, I have never done this before, I have installed my stereo in my car but that was easy I have no idea where to even look for the wires that I need to get the job done, please help anyway you canArthur H.

I suggest leaving this to a professional, but here is the wire colors and locations of the wires needed:

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|wht/red to white    |+  |ignition harness            ||          STARTER|blk/yel to blk/wht  |+  |ignition harness            ||   SECOND STARTER|blk/grn to blk/yel  |+  |ignition harness            ||         IGNITION|blk/wht to blk/red  |+  |ignition harness            ||        ACCESSORY|red to BLACK/ pink *1|+  |ignition harness            ||       POWER LOCK|gray/blue           |-  |at door lock timer *2       ||     POWER UNLOCK|gray/red            |-  |at door lock timer *2       || PARKING LIGHTS +|RED / blue            |   |steering column             || PARKING LIGHTS -|                    |   |                            ||       HEADLIGHTS|RED / blu,RED / yel *3  |+  |steering column             ||     DOOR TRIGGER|RED / white           |-  |drivers kick panel          ||  TRUNK/HATCH PIN|red                 |-  |at right hinge, *4          ||         HOOD PIN|yellow/black        |-  |at pin or *4                ||TRNK/HTCH RELEASE|                    |   |                            ||  FCTRY ALARM ARM|lt. GREEN/ red       |-  |harness from dr. door       ||FCTRY ALRM DISARM|GREEN/ YELLOW        |-  |harness from dr. door       ||       TACHOMETER|green               |   |coil or ECU center dash     ||       BRAKE WIRE|RED / green           |+  |brake pedal switch/dkp      ||     HORN TRIGGER|GREEN / WHITE         |-  |steering column             ||           WIPERS|                    |   |                            ||  LF WINDOW UP/DN|blu/blk - blu/red   |A  |driver window switch        ||  RF WINDOW UP/DN|RED / blk - RED / wht   |A  |driver kick panel           ||  LR WINDOW UP/DN|yel/red - yel/blk   |A  |driver kick panel           ||  RR WINDOW UP/DN|grn/blk - grn/wht   |A  |driver kick panel           |

Notes:

*1 When doing remote start, this wire must be isolated from the keyswitch with the accessory relay.     *2 Timer is a blk or grn box located right of fusebox behind a silver module or up high in the drivers kick behind a silver module, depending on model. Two plugs, white and black. The wires needed to control locks are in the black plug.  *3 these colors are for low beam.  to catch high beam use RED / black(+) and RED / green(+).  *4 also found at the theft warning system in the drivers kick behind the ABS control unit if equipped with factory security.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

I thank you very much for your help, and I would have it professionally done but all the dealers I have talked to are requesting $250.00 for installation and that is a hundered more dollars I paid for the system do you have any Ideas of what I could do?Arthur H.