Wiring 2 pin switches to 1 light

Home / the12volt's Install Bay / Car Security and Convenience / Wiring 2 pin switches to 1 light (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

88_red_dakota

Member - Posts: 21

Joined: January 23, 2006

Location: Canada

Posted: February 25, 2006 at 12:39 PM / IP Logged

My truck is a 88 dakota, and one of the pinswitches does not work and the interior light does not come on when that door is opened. I want to completely redo everything along with an inline fuse. Say both of the doors open and there is 2 ways for the current to get to the interior light, wouldnt it melt the wiring and trip the fuse off? Can someone draw me a schematic of doing something like this?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: February 25, 2006 at 2:17 PM / IP Logged

Why not replace the PIN Switch if that is the problem?

What are you wanting to do?

Have another switch to turn on your Dome lights or just have 1 PIN switch do that?

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring 2 pin switches to 1 light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.