Factoy Keyless entry programing

Home / the12volt's Install Bay / Car Security and Convenience / Factoy Keyless entry programing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: December 30, 2002 at 1:51 PM / IP Logged

I have a 1993 SC400 in my shop and the factory keyless stoped working after installing a alarm disarm wire on a remote start, Anyone know how reprogram the remotes to the system or know why it aint working?

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 01, 2003 at 9:31 AM / IP Logged

If you can get the dealer to let you look at their service manual, that would be the best way. On most newer Toyotas, there's a complicated sequence of sticking the key in and out a certain amount of times, opening and closing the door a certain amount of times, and so forth.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factoy Keyless entry programing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.