Door and Trunk Trigger, 97 Camaro

Home / the12volt's Install Bay / Car Security and Convenience / Door and Trunk Trigger, 97 Camaro (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

donkason

Copper - Posts: 189

Joined: December 27, 2002

Location: United States

Posted: December 30, 2002 at 5:38 PM / IP Logged

My car is a 1997 camaro and I am installing a crimestopper cs-2006fm1 alarm/remote start. I have a problem with the alarm going off about 7-10 minutes after the alarm is armed. I have both the trunk and the door triggers hooked up to my interior courtsey lamps return wire. Is this o.k. or is it letting my b.m.c. play head games with me again. Thanks

J. Mike Perkins

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: December 30, 2002 at 8:51 PM / IP Logged

The white wire at the bcm should cover the front doors and the trunk. Try isolating it with a diode. Use a 1 amp diode with the white band (cathode)facing the alarm wire. Dont run both wires to the white wire in the vehicle. Run the door trgger wire to the white wire at the bcm. That should take care of your problem. Good luck. Brian

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door and Trunk Trigger, 97 Camaro

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.