Autopage 860 2000 Honda Accord V6

I'm trying to get the diagrams and connector information together to install the Autopage 860 in my Accord. I have found some information here, but some of it just adds more questions. Will I need to buy diodes for the install and how many? Will I need any other parts besides what comes in the package? Sorry for all the questions, but I just want to make sure that I have all the information before I tear into the dash area to start tracing back wires. I really appreciate any help I can get! Thanks!!!

click on my home page for an install on 2000 accord 4cyl, very similar to v6Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

you will need three diodes to isolate the hoodpin shutdown wire (WHITE/ black stripe) from the (blue) hood/trunk wire. put a diode on the trunk pin to the blue and two on your hood pin switch wire and connect one to the wh/bk and the other to the blue also. You will also need to bypass the key security. I usually use an autopage honda SL2 bypass. If you use this bypass you will not have to keep a key inside the car as this is a self learning bypass.rb2

Where do I get the honda bypass module?

i got a brand new 556H FS. PM or email me at profuse007@yahoo.comHouston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).