2000 Chevy Tahoe, remote start

Security light on after starting with remote.  Using Triologic DTS8122 & PLXR xpress bypass kit, Green key sense wire is hooked up, White & Brown 2nd & 3rd ign also hooked up, but after starting with remote security light comes on after inserting key and touching brke pedal ( disengaging remote ) normal start with key , the security light is normal ( off )

Any Help would be appriciated.

Thank you in advence

Did you program bypass for pass II? When programming bypass make sure you have the brown wire disconnected from the plxr, I know it sounds dumb but it causes issues with them sometimes. Try it with the keysense wire un-hooked . And also what wire do you have the black wire from the plxr going to? and the blue from the plxr?

make sure it is wired like this

blue - passlock yellow

purple- yellow start wire

pink- pink ignition wire

red- red 12 volt wire

green- light green  keysense wire

black- good ground

program to passlock II they come set for #3 passlock II saturn ION they are totally different.

hooking up purple to start & pink to ign,  keeps the security light off (even though the instructions claim these wires are hooked up for passlock 1)  Thanks to au5599 for the response.