98 Camry Door Locks

Home / the12volt's Install Bay / Car Security and Convenience / 98 Camry Door Locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rudydapimp

Copper - Posts: 390

Joined: February 27, 2006

Location: United States

Posted: December 15, 2006 at 12:42 PM / IP Logged

Put a avital 4100 in this car, which had a factory add on alarm and keyless entry that the guy had lost the transmitters for. Pulled all the alarm crap out and hooked up the avital 4100. RS works great, but problem is that drivers door wont unlock or lock. all other doors work great. Grabbed the blue and blue/white at bottom of fuse panel in orange plug. they both metered from passenger side door. The door lock ont even work from the switch. customer said that it was working when he brought it in. any ideas???

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 15, 2006 at 12:54 PM / IP Logged

probably another case of a customer trying to scam

I go through that all the time

rudydapimp

Copper - Posts: 390

Joined: February 27, 2006

Location: United States

Posted: December 15, 2006 at 2:40 PM / IP Logged

any other ideas?? i trust the guy, I work with him, so that's not an issue. anyone know why the drivers side door would act this way?? read something about child locks, but not sure if that would help.

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 15, 2006 at 3:06 PM / IP Logged

child locks on the toyota would be the unlock part of it

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: December 19, 2006 at 8:42 PM / IP Logged

make sure that when you pulled the old system that there werent any door lock motor wires that needed to be put back together.

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: December 19, 2006 at 8:46 PM / IP Logged

u say u tested the door locks from pass side? did u test from drivers? if so and there was no response than it could be a bad switch.........but im bettin on cut motor wires.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 Camry Door Locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.