giordon 686a and keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / giordon 686a and keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

elstev0

Member - Posts: 5

Joined: August 20, 2004

Location: Australia

Posted: February 03, 2007 at 4:44 PM / IP Logged

i have a giordon 686a and steelmate 386m central locking, i cant figure out how to connect them.

The steelmate has 5 wires Brown, White, black, Green, Blue with the blue and green wires going to connect to the other door actuators.

Any ideas on this would be greatly received.

elstev0

Member - Posts: 5

Joined: August 20, 2004

Location: Australia

Posted: February 04, 2007 at 2:29 AM / IP Logged

well i finally figured out how to get the central locking working i actually clicked on a banner for asianwolf and downloaded the instructions for their alarms which were very clear.

orange - ORANGE / black GROUND

white OPEN (blue on actuator)

yellow - yellow/black +12v

WHITE/ black CLOSE (green on actuator)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

giordon 686a and keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.