factory arm and disarm 07 accord

Home / the12volt's Install Bay / Car Security and Convenience / factory arm and disarm 07 accord (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

csnut18

Copper - Posts: 196

Joined: January 27, 2007

Location: United States

Posted: May 27, 2007 at 1:47 PM / IP Logged

Hey guys, I know the factory disarm wire is only inside the drivers door on the 07 accords. My question is, is this wire accessible by taking off only the front panel or is more disassemble required? Also do you have to wire through a molex on this car to do this or is their any other way that you guys recommend? I know this is a popular car so hopefully some people on here would of had to of gone through this already. Thank you in advance.

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: May 27, 2007 at 3:26 PM / IP Logged

The wire runs between the key cylinder and the power window switches, so it can be accessed by pulling up the door finisher. However, you will have to run the wire through the molex connector. Its a pain, but its the only way to get it done (That I know of).

Kevin Pierson

rudydapimp

Copper - Posts: 390

Joined: February 27, 2006

Location: United States

Posted: May 27, 2007 at 4:08 PM / IP Logged

Use the bypass from bypasskits.com. No need for running wires into the molex. model HODL4. very nice unit. Found out about it on here, love it. have a nice stockpile of them in the bin now!!

csnut18

Copper - Posts: 196

Joined: January 27, 2007

Location: United States

Posted: May 27, 2007 at 6:20 PM / IP Logged

Thank you, I am looking into that bypasskit part now.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory arm and disarm 07 accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.