Make a Starter Kill

Home / the12volt's Install Bay / Car Security and Convenience / Make a Starter Kill (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

PimpP495

Member - Posts: 13

Joined: February 14, 2003

Location: United States

Posted: February 14, 2003 at 11:36 PM / IP Logged

I have a 95 Z24 cavalier with a Prestige Platinum Alarm system, the alarm has everthing except a starter kill. Is there any way I can make my own..... I heard it isn't very difficult

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: February 15, 2003 at 10:28 AM / IP Logged

yes, get a relay , cut your starter wire in half its color should be yellow, conect one end of your starter wire to pin 30 connect the other to pin 87a, connect 12 volts topin 85 and connect your armed out put wire to pin 86, there you go!!!

zargon ruler of estranorth

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: February 15, 2003 at 10:36 AM / IP Logged

You can connect it as zargon described, but you should connect pin 85 to a 12V+ ignition source and not a constant 12V+ source. If you connect it to a constant 12V+ source, the coil of the relay will be energized for as long as the alarm is armed and will drain your battery in as little as two days or less. https://www.the12volt.com/relays/page2.asp

the12volt • Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Make a Starter Kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.