clifford 800 iq remote problem

Home / the12volt's Install Bay / Car Security and Convenience / clifford 800 iq remote problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

car78

Member - Posts: 2

Joined: February 13, 2006

Posted: August 03, 2007 at 7:58 PM / IP Logged

I have a 800 IQ and my remotes always have to be pressed 3-5 times to arm and disarm the alarm. I disconnected the antenna for five minutes, checked the connections and replace one battery. I still have to push my button many times to get this alarm to work. Could this be that two remotes when bad at the same time, the antenna or the brain? Any other ideas???

thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 04, 2007 at 1:43 PM / IP Logged

Check and if resolder the battery holder in the remotes at the same time changing the (CR 2032) battery. If it's a 4 button with that battery, that's probably your problem.

car78

Member - Posts: 2

Joined: February 13, 2006

Posted: August 05, 2007 at 1:43 AM / IP Logged

Thanks for the reply howie, but my remote is a 4 button plus one on the side and it takes a A23 battery. I just tried playing with all the contacts and my remote only seems to work after pressing the main button about 3 or 4 times. I am still happy that my alarm can be turned on and off but this is getting old fast. I just ordered another remote and hopefully this will rule out my remote being the problem. I should know by Wednesday and I'll post my results.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 800 iq remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.