viper 160xv with 2006 f350 psd

Home / the12volt's Install Bay / Car Security and Convenience / viper 160xv with 2006 f350 psd (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crashed_ct

Member - Posts: 2

Joined: July 23, 2007

Location: United States

Posted: August 06, 2007 at 11:16 AM / IP Logged

new to the forum so bear with me. I currently have a 2006 F350 PSD with a viper 160xv remote start/alarm - remote start and alarm worked fine until I decided to try and make a change with the alarm chirping when lock/unlocked. Now.. truck will remote start 3/5 times and when it starts it only runs for +/- 10sec.

any thoughts on how to get this working again with a bitwriter? I have changed 2/1 - 2/2 - 2/5 options trying to get it to work with no luck..

any help would be greatly appreciated.

crashed_ct

Member - Posts: 2

Joined: July 23, 2007

Location: United States

Posted: August 06, 2007 at 11:17 AM / IP Logged

sorry.. error in previous post - I do not have a bitwriter.. I am making changes thru the valet switch and menu options.

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: August 08, 2007 at 11:21 AM / IP Logged

reset the unit and reprogram from the beginning

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: August 08, 2007 at 2:40 PM / IP Logged

If the truck has antigrind from the factory then the following would work:

The original installer probably programmed the unit for voltage sensing, 4 second crank time, and engine checking off.

To test if the truck has factory antigrind....start truck with key and continue to hold key in start position. Does it continue to crank or does it stop cranking on its own after it starts?

If it doesn't have antigrind, you will need to adjust the cranking time so it cranks long enough to start, but not so long to grind the starter. Somewhere between 1.2 and 2.0 seconds should work. Program the other settings for voltage sensing and engine checking off.

crashedct

Member - Posts: 1

Joined: January 21, 2006

Location: United States

Posted: August 14, 2007 at 2:23 PM / IP Logged

JWorm - thanks for the excellent info. it finally works again..

CrashedCT

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 160xv with 2006 f350 psd

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.