remote start on manual, 07 jeep wrangler

Home / the12volt's Install Bay / Car Security and Convenience / remote start on manual, 07 jeep wrangler (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pacojeep

Member - Posts: 3

Joined: November 26, 2007

Posted: November 26, 2007 at 6:19 PM / IP Logged

Hi I'm going to install a scytek galaxy 5000RS-2W for manual transmission on my Jeep Wrangler JK 07 and have a little question about clutch bypass

In the install manual () http://scytek.net/pdf/product_galaxy_combo_5000RS-2W_manual.pdf , it says to connect the ground when runing output with a clutch bypass relay

Here is the 2 type of relay

remote start on manual, 07 jeep wrangler -- posted image.

Here is my vehicule clutch and starter wiring diagram and the clutch switch connector:

So the clutch interlock wire is yellow/orange but I'm really not certain of which of these relay to use

thx marco

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 27, 2007 at 2:29 AM / IP Logged

The Astrochart shown using the yellow/orange on the switch . A negative start signal.

It can also be found at the PCM C3 white connector pin 21 white wire. same negative start signal.

pacojeep

Member - Posts: 3

Joined: November 26, 2007

Posted: November 27, 2007 at 8:46 AM / IP Logged

I know which wire to use ... I don't know whitch relay to use ...

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: November 27, 2007 at 10:36 AM / IP Logged

If your rs has no neg start wire, then just use relay 1. connect pin 30 to black (cav2) and pin 87 to yellow/orange (cav3) wire.

pacojeep

Member - Posts: 3

Joined: November 26, 2007

Posted: November 27, 2007 at 5:04 PM / IP Logged

Heu .... black is cav3 and yellow/orange is cav2 and(-)

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: November 27, 2007 at 8:10 PM / IP Logged

Oops, you are right. I got the cav 2 & cav 3 mixed up, anyway it could have done no harm.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start on manual, 07 jeep wrangler

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.