door locks

Home / the12volt's Install Bay / Relays / door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 24, 2012 at 12:22 PM / IP Logged

hELLO I was wondering if anyone knew what relay diagram i should use if im going to be adding aftermarket power door locks and i want to add a switch and also connect it to my keyless entry, (alarm) the alarm has a (-) polarity output so the connections should be for (-) polarity, thank you

cesara

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 24, 2012 at 1:09 PM / IP Logged

https://www.the12volt.com/doorlocks/page3.asp#arp

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 24, 2012 at 1:14 PM / IP Logged

Which one would it be? I tried the 5 wire diagram but nothing happens .

cesara

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 24, 2012 at 2:07 PM / IP Logged

That link should take you directly to the one you need. It is labeled Actuators / Reverse Polarity.

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 24, 2012 at 2:26 PM / IP Logged

Ok found it. but what if I want to add a switch to this diagram? Do I piggy back the wires going to the alarm lock and unlock?

cesara

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 25, 2012 at 12:51 AM / IP Logged

Yes.

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: September 25, 2012 at 6:14 PM / IP Logged

To lock / unlock by a switch just connect one side of each switch to ground, and the other to the lock / unlock inputs (alarm connections)

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.